I am running my power wire by my driver seat. I need to know a good place to run it. I don't want to drill through the fire wall. If there are any suggestions I'd love to know. Thanks.

__________________
20O3 extended cab, 2wd, silver, 3.0, toyo spectrum tires, 10,000k HID's, 8' in bazooka tube, and UWS toolbox

Depending on the size you may be able to squeeze it through a existing hole in the fire wall.

__________________

Thats what I thought, but I can't find one.

__________________
20O3 extended cab, 2wd, silver, 3.0, toyo spectrum tires, 10,000k HID's, 8' in bazooka tube, and UWS toolbox

Up around where the steering shaft goes through there are some. Also where the main wire harness runs.

__________________

When I was running power for my lights I ran it through an existing rubber gromit about where STL said. I used a small flathead screwdriver to move it aside and a wire coat hanger to fish the wire through.

Sent via Tapatalk on Android

__________________
02 Ranger XLT 4x4 Off Road, 4.0L SOHC, Automatic, 8.8 4.10 LS, Super-Cab, 3" Body Lift, 33x12.5x15 BFG All Terrains on 15x8 M/T Classic IIs, 5K 55w Heads, 5K 35w fogs, custom front skid plate, various other goodies.

What gauge wire are you trying to run?

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

I was able to run 4 ga through the main wiring harness grommet , it was a bit of work but it did go through

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

I ran mine under my dash, then through my door jam and through the space between the fender and hood. Its kind of ghetto but you cant see it and it works.

__________________
1998 Chevy Silverado 4X4 5.7 V8

SOLD 1996 XLT 4x4 4.0 5 speed

I ran mine through fender, under the truck and then into the grommet with the cab bolt under the carpeting, but after seeing where you all put it, that may change.

__________________
2001 Mazda B-3000 CabPlus "FX2 Off Road"| 3.0 | 5 SPD | 3 In Spindle Lift | Belltech Shackles | UltraGauge |Alpine Head / 10" Kicker Setup | Air Box Mod | Add-A-Leaf| Thrush Welded B4 Rear Wheel | Kobalt Box | Cobra 19 DX IV | Custom PA Speaker | Front/Rear Tow Receiver | 2X Aux Lights | Hideaway Strobes | Back Rack Safety Rack | Amber LED Strobes | Blue LED Strobes | 265/75/R16 General Grabber AT2's