is it an sa8?

----------

just downloaded it. yeeeeeeah, my 10 doesnt go low enough haha

__________________

2017 Ford Fiesta ST
2014 Ford Escape Titanium Ecoboost AWD

I doubt that generic box is tuned properly for it. Offer $75 and make a properly ported box or solid sealed, depending on your music tastes.

yes the second picture shows which one it is ---------- he "says" its custom built for the sub and I can hear it before I buy it

__________________
2000 ford ranger trailhead. 1985 k10 blazer 4x4
3.0 v6. 11" lift
2wd 40" tires
After market radio. 20" XD series rims!
Roll bar and toolbox
Offroad lights

thats a prefab box from crutchfield..

the subwoofer really would need a different box to get the most out of it

__________________

2017 Ford Fiesta ST
2014 Ford Escape Titanium Ecoboost AWD

to be honest though the box isn't as big a deal for me. Yes it's an important part of a system but the box I have my 10 in isn't even set up for the sub.

----------

I'll probably take a look at the sub and listen to it then decide.

__________________
2000 ford ranger trailhead. 1985 k10 blazer 4x4
3.0 v6. 11" lift
2wd 40" tires
After market radio. 20" XD series rims!
Roll bar and toolbox
Offroad lights

The box makes all the difference in how the sub sounds. If the seller doesn't have rated power to the sub, 400 watts rms, or doesn't have a properly set lowpass filter, you can listen to it all day and not know.

Over the last few days I went through this thread looking for sub box ideas. There's a lot of info in one place.

I picked up an 03 extra cab 4 door to use as a work truck. It'll just be me or one other person, so the jump seats are coming out. I need to have room for tools in the back so the box can't be to big. I'm working on designing a 1-1.5 cu ft sealed box for two sundown sd-2 10's(left over from another project). If anyone has plans already written up for something similar that would be awesome.

I'm also trying to decide where to place the tweeters in the doors. I'm leaning towards putting them in the adapter plate with the woofer behind the door panel.

My stereo gear will be
Pioneer DEH-X8600BH deck
Focal PS 165 components front doors
Rear door speakers undecided
Alpine KTP-445U amp for front and rear speakers
Massive Audio N2 800 RMS @1 ohm sub amp
2 Sundown SD-2 10's sealed downfire
4ga amp kit from Knukonceptz
Total spent for everything listed $800. Gotta love eBay.

Hondakiller , as for your front speakers , I run 6.5 components in my doors , I made an adapater plate so I could mount both the tweeter and woofer in the stock location , I put the tweeter on top . The sound stage is at the height of the dash ,with a good center image . on some songs it even sounds as if there are instruments out on thed hood .

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

I think that'll be the easiest and cleanest way to install. It also stands out less. "Passive anti theft"

that is why I did it that way too,

__________________
2003 Ranger totally stock for now ,mods coming soon .
SOLD 1996 Mazda B3000

what sound deadener do yall recommend?

__________________

2017 Ford Fiesta ST
2014 Ford Escape Titanium Ecoboost AWD

http://www.sounddeadenershowdown.com/products

CLD tiles

MurderMat

Sooo my old man says if you hook up both + wires to the + terminal and both - wires to the - terminal. The subs will hit harder. But I don't think my subs can handle 900 watts...I don't wana blow them

__________________
2020 KW T800
Quad Axle Dump Truck
MX13 PACAR I6
The Lone Ranger

do you have the model number for your subs and amp?

__________________
Black 2008 ranger sport 4.0 SOHC SAS'd and converted to 4x4 riding on a Dana 50 up front and a sterling 10.50 in the rear regeared with 5.13's, mickey thompson classic 3's rapped in 37x12.50 maxxis creepy crawlers