Show Your System - Page 255

GLH · #**3811** 11-20-2014, 06:30 PM

XPE2700 - Has a 30 amp fuse so might do this -

50 watts x 2 channels (4 ohm speakers)

75 watts x 2 channels (2 ohm speakers)

Bridged RMS Power -

150 watts x 1 channels

----------

The XPE4700 has 2 - 25 amp fuses so it might do 50 watts RMS x 4.

----------

150 watts RMS is way underpowering those RF subs.

pk9298 · #**3812** 11-20-2014, 06:31 PM

No Idea what any of that is. Watts Amps and ohms I know is an electrical term. Ohms is resistance right?

GLH · #**3813** 11-20-2014, 06:43 PM

Yes, and watts is power and amperage is current.

----------

What are the model #'s of the subs ?

pk9298 · #**3814** 11-20-2014, 08:10 PM

Quote:

Originally Posted by GLH

Yes, and watts is power and amperage is current. ---------- What are the model #'s of the subs ?

can't find a number anywhere on it. It's got says logic Q on the sub protecter. The plastic piece that goes over the subwoofer.

----------

This as close as of a pic that I could find. I'll snap a pic of it tomorrow

pk9298 · #**3815** 11-20-2014, 08:10 PM

Zz

GLH · #**3816** 11-20-2014, 08:18 PM

The model number would be on the sub magnet. Noone can recommend an amp for those subs without knowing what they are.

pk9298 · #**3817** 11-20-2014, 09:04 PM

Quote:

Originally Posted by GLH

The model number would be on the sub magnet. Noone can recommend an amp for those subs without knowing what they are.

okay I'll take the backing off the sub and look tomorrow. Thanks for the help guys. I'm a noob when it comes to this....not as simple as just plug and play

AmericanPride! · #**3818** 11-20-2014, 09:40 PM

Quote:

Originally Posted by pk9298

Zz

Quote:

Originally Posted by GLH

The model number would be on the sub magnet. Noone can recommend an amp for those subs without knowing what they are.

Those are Punch 2's or HE2's. 400 RMS, and there were different voicecoil setups

pk9298 · #**3819** 11-21-2014, 09:14 AM

Here's an actual pic of the sub. I can't get cover off the back to get the model number.

pk9298 · #**3820** 11-21-2014, 09:19 AM

The back

pk9298 · #**3821** 11-21-2014, 09:47 AM

I know the saying. You pay to play but I really don't wana dish out a lot of money. But here's an amp I was looking at http://www.walmart.com/ip/BOSS-Audio...ifier/15780045

AmericanPride! · #**3822** 11-21-2014, 09:52 AM

Quote:

Originally Posted by pk9298

Here's an actual pic of the sub. I can't get cover off the back to get the model number.

We either need to see the actual back of the sub (that's just a prefab box with RF sub) or we need you to get a meter reading of the impedance (ohms) at the wire terminal

pk9298 · #**3823** 11-21-2014, 09:55 AM

Quote:

Originally Posted by AmericanPride!

We either need to see the actual back of the sub (that's just a prefab box with RF sub) or we need you to get a meter reading of the impedance (ohms) at the wire terminal

and how does one get a reading of the sub? I assume you use an electrical reader. Sorry for my noobness. Thank you guys for all the help so far. As for the back of the sub I can't get the back cover off. Took the screws off and tried prying it off and no luck

AmericanPride! · #**3824** 11-21-2014, 09:59 AM

Quote:

Originally Posted by pk9298

and how does one get a reading of the sub? I assume you use an electrical reader. Sorry for my noobness. Thank you guys for all the help so far. As for the back of the sub I can't get the back cover off. Took the screws off and tried prying it off and no luck

Take the grille off the front and then unscrew the sub

Or, yes. A DMM, digital multi meter would get you the reading. I'm guessing it's a 4 ohm

pk9298 · #**3825** 11-21-2014, 10:06 AM

Quote:

Originally Posted by AmericanPride!

Take the grille off the front and then unscrew the sub Or, yes. A DMM, digital multi meter would get you the reading. I'm guessing it's a 4 ohm

alright I'll try that.