Show Your System - Page 185

TE_CustomZ · #**2761** 12-12-2013, 08:53 AM

Quote:

Originally Posted by tomdmcpwn

My rear view has been a tiny bit loose from the trucks age, so it's really easy to move. My sub has about rendered it useless. That little 300 watt does a decent amount of work! I gorilla glued the mirror pivot joint to where I need it until the new one I ordered gets here. Before when I started the truck the mirror would be fine and after my 15 minute drive home it would be pointed almost straight down.

Lol yea my first major system in mine (2 12s on 4000 watts) the mirror lasted less than 2 songs. About 5 mins lol

colby21 · #**2762** 12-15-2013, 01:25 AM

ForumRunner_20131215_012249.jpg

ForumRunner_20131215_012334.jpg

ForumRunner_20131215_012404.jpg

ForumRunner_20131215_012420.jpg

These are my most recent boxes. The black is a 2 12 enclosure with a top folding lid and a space in the middle for my ps3 and stuff. The carpeted one is in my truck now and is ported. There's a door over the amp to hide everything. Looks actually pretty cool. The black one I had covered with armagaurd box liner (rhino liner) but had to go because it was so big and cracked my windshield.

tomdmcpwn · #**2763** 12-15-2013, 01:28 AM

To... To keep your ps3...?

colby21 · #**2764** 12-15-2013, 01:37 AM

Quote:

Originally Posted by tomdmcpwn

To... To keep your ps3...?

Lol yeah I have a flip out deck now but had a 7inch in dash deck. I run a secondary battery and a 3000 watt inverter. The ps3 is now gone but the inverter runs my air compressor. (Lol for the air cylinder for my tonneau and my air horns)

colby21 · #**2765** 12-15-2013, 01:42 AM

ForumRunner_20131215_014411.jpg

ForumRunner_20131215_014444.jpg

There's my first box and my dash.

tomdmcpwn · #**2766** 12-15-2013, 01:45 AM

Nice. I just feel like with my little knowledge, having a ps3 so near to the subs would cause internal issues.

colby21 · #**2767** 12-15-2013, 02:04 AM

Yeah I was worried too but I only had game sounds running when the ps3 was on so it wasn't to bad. My next box will be made out of fiber glass. I've been practicing making it and painting. (Gotta be perfect) Lol I'm also in the midst of shaving my tailgate and putting a bigger air tank in to hopefully run bags one day.

TE_CustomZ · #**2768** 12-15-2013, 06:20 AM

Quote:

Originally Posted by colby21

These are my most recent boxes. The black is a 2 12 enclosure with a top folding lid and a space in the middle for my ps3 and stuff. The carpeted one is in my truck now and is ported. There's a door over the amp to hide everything. Looks actually pretty cool. The black one I had covered with armagaurd box liner (rhino liner) but had to go because it was so big and cracked my windshield.

Did it now? Lol with two 12s? Got any vids?

RangerSport4x2 · #**2769** 12-15-2013, 08:21 AM

Quote:

Originally Posted by TE_CustomZ

Did it now? Lol with two 12s? Got any vids?

i doubt anyone cracked a windshield with two 12's alone. Must have already had a crack in it that web'd out.

TE_CustomZ · #**2770** 12-15-2013, 11:45 AM

Quote:

Originally Posted by RangerSport4x2

i doubt anyone cracked a windshield with two 12's alone. Must have already had a crack in it that web'd out.

Maybe. Still a slim chance. I could bust my windshield with a type r 12 if I threw it hard enough. Lol

colby21 · #**2771** 12-15-2013, 12:04 PM

Quote:

Originally Posted by TE_CustomZ

Did it now? Lol with two 12s? Got any vids?

Lol yeah already had a crack. I built the box too big for the truck so I couldn't move the seat back but i think with it being ported and big it made it super loud. I had one small crack that had been repaired and now its all the way across my window. Happened when I was playing some Eminem lol

TE_CustomZ · #**2772** 12-15-2013, 12:53 PM

Lol I was about to say. I have 4 15s on 4000 watts rms in my ranger and she's holding strong. Windshield barely moves and my ranger meters right above 150db sealed up.

Diesel_Ranger · #**2773** 12-30-2013, 08:36 AM

First stages of upgrading my system.

-Pioneer TS-M650PRO Mid Range 6.5 Speakers.
-3/4" MDF 6x8 to 6.5" Adapter/Spacer
-Pioneer GM-D8604 4 Channel Amp
-Pioneer Single DIN Headunit installed where the HVAC controls go - missing pic

531889_10152158444052846_1854251131_n.jpg

The spacer solved the fitment issues without having to cut into the door card.
20131228_172416.jpg

Amp nicely tucked away under the seat. Main reason I chose this amp was its compact size, 100WRMS of power and ~$180 price.
20131228_172647.jpg

I'll add pics of the finished product soon.

01RangerEdge · #**2774** 12-30-2013, 10:29 AM

Quote:

Originally Posted by colby21

Attachment 82963

Attachment 82965

Attachment 82966

Attachment 82967

These are my most recent boxes. The black is a 2 12 enclosure with a top folding lid and a space in the middle for my ps3 and stuff. The carpeted one is in my truck now and is ported. There's a door over the amp to hide everything. Looks actually pretty cool. The black one I had covered with armagaurd box liner (rhino liner) but had to go because it was so big and cracked my windshield.

Nice, I've been looking for ideas on upgrading from my single sub system.

I may take the concept of these boxes but add my own twist.

Frizz2012 · #**2775** 12-30-2013, 10:59 AM

Just a little boston 12 in a pre fab for now. Actually bumps alright for a boston..
Probably because that ARC Mini 4-chan amp powering it!...

image-2467328720.jpg