I was thinking about replacing all four speakers in the truck, but ended up realizing it would never be enough. So i'm going to put the amp and the old boomer in.

My question: can i access the rear speakers wiring by taking off the back pannel?

I believe so the wire harness runs down the floor and then splits off at the back wall to the speakers.

__________________

Thank you thank you thank you!

Waiting till the temp clears to begin..

Actually scratch that!

I asked the tech at the dealership, he pulled 3d plans and showed me that each wiring set goes under the plastic step covers (left under the left one, right under the right one), which is way easier than taking out the seats and then the back pannel.

How do you take off the back door panel on an ext cab? didnt wanna mess mine up by risking it u guys know?

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

You have to take the back mini seats off first.

i have a 4 door =P

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

For the door panel you pull really hard at the inside edge.

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

sorry, i misread since i was on another topic

inside edge? so like where the top of the seatbelt is at?

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

Other inside edge. Like if you have the door open, the left side of the panel is where you need to pull.

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

oh ok, one more ?. will the seatbelt triangular harness thing get in the way of that panel off? i have an annoying ratle in thr door so im trying to open it up to c if its a loose screw or something

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

Yes. It's like a 13mm socket to take it off though. Very simple.

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers

sweet awesome i gotta go tear it apart now = P thanks!

__________________
my lil prerun run... tires and junk cool tube bumpers, fiberglass, cool colored lights, loud bass and a tire rack so you know im cool

No problem.

__________________
Mods: Xcal 2, K&N Drop-In, Line-X, DSG Heads/Corners, 6000k Hi/Low HID's, 6K HID Fogs, Foglight Mod, Throttle Cable Mod, 6.5" Digital Designs, Rockford P400.4, 2 Sundown SA-15's, MB Quart DSC 2000.1d, Cranked T-Bars, 285/75/R16 Nitto Terra Grapplers