so hey guys 01 edge truck here, i have installed a pioneer single din radio last march and aftermarket 6x8 speakers in each door, all the connections are soldered to the speakers and the radio is butt connected in, whenever i take a right turn as of the last month the power to the radio stays on but the connections to all speakers is lost, when i straighten out they all come back, ive checked all the connections and they are solid i just dont understand it, any insight? thanks

Rears stock?

Obviously a bare spot on one or more speakers wires that contacts metal when you turn. On some newer headunits, when 1 speaker wire is grounded out, all speakers are affected.

stop turning right, problem solved

__________________
2000 Ranger Sport EXT.

Soundqubed HDS315, birch box tuned to 31 hz. 8in Aeroport. Pioneer DEH80PRS,Vifa Tweets, PRV Mid bass and mids. FSD FZ2600 and FZ85.4

rears are aftermarket pioneers, soldered connection, with electrical tape covering the solder

----------

ill check out the connections behind the stereo, everything seems tight but who knows, this things haunted.

----------

I dont think my trucks a race car hahaha

Go nascar.

__________________
2000 ford ranger trailhead. 1985 k10 blazer 4x4
3.0 v6. 11" lift
2wd 40" tires
After market radio. 20" XD series rims!
Roll bar and toolbox
Offroad lights

Yay nascar

The point was that you can get anywhere you need only turning 1 direction, just takes awhile