PDA

View Full Version : aftermarket stereo system no sound


custom ford 1
03-23-2010, 01:27 AM
I Put in an aftermarket stereo and subs and amp in a 1993 ford ranger. However Im not getting any sound to the subs. everything else works fine. I have good power to the amp. Everything is brand new and the stereo works great. Just not getting the subs to turn on after installation:mad::mad:

Ruger Splash
04-06-2010, 12:10 AM
is your amp turning on? if it isn't you need to hook up the remote turn on lead from the radio to the amp. If it is turning on check your crossover settings on the amp. if they are ok ( this is gonna sound dumb) take a little extra speaker wire and a 9 volt battery. Put the speaker wire in the terminal for the box and tap the other end to the 9 volt... if the speakers move.. they are wired to the terminal cup.. if they dont move... Pull the subs out of the enclosure and check the wiring.