kgruett
11-26-2008, 11:33 PM
...reservoir and the clutch i cant find i can smell the leak in the cab and it is not from the reservoir itself
Grrranger
07-05-2009, 09:42 PM
First time I had that on an '88 Bronco II, I wound up putting a new slave cylinder in. This was caused by a cracked lid on the reservior, which allowed dirt in. Flushed out all the old fluid and put a new reservior on - which was pretty easy compared to getting the transmission out to change the slave cylinder.
From the reservior, a hose runs down to the master cylinder and from there to the quick connect fitting at the driver's side of the bell housing. Good luck!
DangerRanger98Josh
10-11-2009, 08:51 AM
follow the line from the res down to master, then to the slave. you might have a bad throw out bearing or slave cylinder.. or cracked lid like Grrranger said