View Full Version : Impress me! what are ya'lls 8V Ranger HP TQ Specs?

12-19-2011, 11:47 PM
time to brag it up give me Horse power, torqe, Miles per gallon. if you got a V8 in it I wanna hear about it! THANKS!

12-20-2011, 10:18 PM
i have not dynoed it but im thinking it should do 450-500 to the tires. it is a race truck only so i dont have mpg.
my motor is a 347 with pro comp 210 heads. it is around 12:1 Compression motor. my truck only has a 6 point cage in it so i dont think i can go any faster than a 11.00. i have a c4 tranny. im installing the motor now but i am going to get it dynoed so i will have some numbers soon

12-21-2011, 04:31 AM
Desktop dyno (not 100% accurate, but close) is listing my Supercharged 5.3L at 505hp on 8psi. Blower and motor is capable of 14psi, but I will probably leave the pulley on it and run it at 8psi.

12-21-2011, 01:23 PM
Only did 1 dyno pass was suppose to be 396 HP actual was 375hp@6000
379.7 torque @4000

12-22-2011, 12:26 AM
i havent had it on a dyno yet but im at 18mpg 4x4 with 35s motors got 21lb injectors free flow exhaust ported intakes