View Full Version : 6x9 in rear door
desjardo
05-16-2010, 01:36 PM
So I have a nice set of 6x9's i would like to put in my back doors. Has any body else done this?
I have seen a few guys online do it before
It could probably be done with just a cutout of MDF screwed into the 6x8 holes, then holes drilled for the 6x9's. Shouldn't be hard at all. And that way you wouldn't have to hack up your door in the process.
joldtown
05-16-2010, 09:00 PM
^ What he said.
Wirwin
05-28-2010, 03:15 PM
It could probably be done with just a cutout of MDF screwed into the 6x8 holes, then holes drilled for the 6x9's. Shouldn't be hard at all. And that way you wouldn't have to hack up your door in the process.
What is MDF?
What is MDF?
From wikipedia:
Medium-density fiberboard (MDF) is an engineered wood product formed by breaking down hardwood or softwood residuals into wood fibers, often in a defibrator, combining it with wax and a resin binder, and forming panels by applying high temperature and pressure. MDF is more dense than plywood.
Link: http://en.wikipedia.org/wiki/Medium-density_fibreboard
Almost all audio related fabrication (subwoofer boxes, etc.) are constructed out of MDF or fiberglass.
Looks like this comes in a variety of thickness
http://idowindows.files.wordpress.com/2010/03/mdf_board.jpg
|