Re: 1999 2.5L Timing belt snapped, replaced it, won't start
Swan2012,
Bolt in Crankshaft is 7/8 inch.. it comes out counter-clockwise, lefty loosey. if you have access to an air gun, the quickest and easiest way to break it loose, or you can use breaker bar propped against frame rail and crank the motor with key, should break it loose..
you'll usually need a pulley remover to get the pulley off of the crank once the bolt is removed.
__________________
Thanks in Advance!
____________________________________________
1999 Ford Ranger XLT Reg Cab Flareside
2wd, 5speed manual
2.5 ltr 4 cyl SOHC 197,000 Miles
|