View Single Post
 
Old 06-29-2012, 09:00 AM
pooleo pooleo is offline
Ban Survivor. (x2)
 
Join Date: Jun 2010
Posts: 6,764
Default Re: 91 5 speed transmission wont go on!

Its most likely the clutch is out of alignment or the splines are not lining up. The slave is hydrolic, it would not be pushed out/stuck out. Unless you have the line hooked up and pushing fluid thru it.

The clutch must be centered. The trans shaft has to line up to the clutch and the pilot bearing. If the disc is not centered, you will have a butt load of problems.

And if its about an inch, that tells me that the shaft is not going into the pilot bearing. Its hitting on the side of it.
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
Reply With Quote