Re: Transmission would not go into gear
I did have the inputand output seals replaced in the transfer case about a month ago. They did the tailshaft seal in the transmission as well I believe. I checked the fluid level in the clutch master reservoir, it looks ok, and no signs of a leak up top. I have a big service coming up in the next 1000 km or so. I will mention this to them and have them check the fluid levels in the transmission, transfer case and clutch.
__________________
2011 Ford Ranger Sport 4x4
4.0L SOHC
5 Speed Manual
MBRP stainless catback
"Air Box Mod" with K&N drop in
GlowShift Oil pressure & Volts in A pillar pod
T-bar crank to level
|