Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-07-2015, 07:01 PM
csauer2014 csauer2014 is offline
Learning to use the forums
 
Join Date: Apr 2015
Posts: 3
Default crown vic 5.0 in 99 2.5

My ranger is a 99 2wd 2.5l M/T with a 3in body lift and 3in suspenion lift and 33in tires. last friday it threw a rod through the block, but luckly i have a 5.0 and aod tranny from a 91 crown vic that i rebuilt i also already have the radiator from a 4.0 expo, 2wd 4.0 motor mounts and the adaptor plates for the 5.0 and a megasquirt ecu. I need more info/advice for the fuel system, wiring, fitting, wiring and trans cooling. i havent seen anyone successful swap this kind of setup into to a ranger so im basically in the dark about most of this.
Reply With Quote
Reply

Tags
2.5l, 5.0, swap, v8 swap

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
crown vic motor on ranger 95 ranger 3.0 General Tech 32 09-05-2014 06:47 AM
Craigslist / eBay Find: the sicked crown vic out there fmx4lif3 Trucks 13 05-22-2012 07:41 PM
Last Crown Vic 2011FPKP4X2 Laugh Factory 29 09-18-2011 03:11 AM
Steel Crown Vic Wheels? Gunner Wheels and Tires 8 07-20-2011 06:01 AM
The history of my crown vic Ranger01 Vehicle Snapshots 3 07-22-2010 04:03 PM