Quote:
Originally Posted by HIGH TECH REDNECK
Kicker comp runin around 250 peak watts
|
Peak ? What does 'peak watts' mean ? Yes, this is a lesson.
----------
Quote:
Originally Posted by Greg R
made mine out of 3/4" super refined mdf.
|
Sealed enclosure ?
----------
Quote:
Originally Posted by MisterGrubbs
That's a single 4ohm 120w rms(from what I can see on the motor) Pioneer. With that in mind, a decently clean 150w rms amplifier should be sufficient for it.
Also, underpowering a sub or any other speaker will NOT damage it.
What WILL damage it - is the fact that people who ARE underpowering it tend to turn the head unit and/or amplifier(s) up too loud, causing distortion/clipped signal - which WILL kill a speaker, virtually no matter the power.
|
10-4, which is why you should be setting your gains with a DMM to whichever is less, the subwoofer or the amplifier RMS rating.
http://www.soundsolutionsaudio.com/f...mplifier-gain/
----------
Quote:
Originally Posted by KyrosFactor
Great thanks, any brands you would recommend? Good quality but not too expensive?
|
http://www.crutchfield.com/p_2061DX2....html?tp=35834
http://www.crutchfield.com/App/Produ...N2002&g=346950
Also, that Pioneer subwoofer will perfrom best in 1 cu.ft. internal volume sealed enclosure.