View Single Post
 
Old 07-29-2009, 07:20 AM
yodapuff87 yodapuff87 is offline
Liking the Ford Ranger Forum
 
Join Date: Jul 2009
Posts: 22
Thumbs up 98' 3.0L... No acceleration, power, or pep

Yeah, I agree with the suggestion regarding pulling my injectors and getting them professionally cleaned and calibrated.
Also, my buddy and I were discussing the CAT this morning. Since I did just have a ton of work (necessary maintenance) done. I am going to have a compression test done on it (the engine). The exhaust is four years old, but I'm not sure if the CAT was replaced/serviced at the time. That is going to be something else that will be addressed.
It is definitely running STRONG since ALL the seals, gaskets and sensors were replaced a few weeks ago. Adding the complete K&N Cold Air Intake kit and changing the fuel filter two days ago was also a plus.
My plan next is:
1. have the injectors cleaned and calibrated
2. engine compression test
3. fuel pump test
4. check the catalytic converter to see if it is plugged
__________________
Jeff
Huge Ranger Fan!!

Last edited by yodapuff87; 07-29-2009 at 07:29 AM.
Reply With Quote