Quote:
Originally Posted by rangerdanger6
i bought this set up for my ranger, and i was wondering if i could run an 800 watt or 1000 watt with them without blowing out my subs, thanks
|
An 800 watts RMS amp will be OK, if you set the gain with a DMM for 600 watts output. Not sure you can set any 1000 watt amp to only output 600 watts.
----------
Quote:
Originally Posted by pooleo
no, it could be DVC, SVC, 4ohm, 2ohm. That all plays a part in how many watts it will draw from the amp.
You can easily run a 300w 12 from a 1000w amp. If its SVC, 4ohm. It would only draw 1/4 of the power from the amp. Say you have a 1 ch. 1000w amp, with a 4ohm load, it would only draw 250w of power, 5o watts below the 300
|
NO.
The subs are 300 watts RMS each. They are SVC 4 ohm each. Wired together properly, they will present a 2 ohm load to the amp. Any amp will 'see' the same 2 ohm load, regardless what the amp's power output is.