Valve for when its stored in the garage


Brake switch, we got an exhaust shield made and mounted, and have a rock shield made for the brake switch just not yet installed, need to do some tig work to it first






Gps is mounted and all wired up




The roof bar is completely wired now, and every light is working. If you look closely the wire on the v bar never actually touches the bar




Panel light is mounted


Horn Button & PTT mounted




Computer Support Bracket


Pumper and Intercom




Start of rear bumper, just need to fully weld and add the other two gussets


Still no luck on getting fuel level fixed, and on top of that we hit another snag. The tach shift light is no longer working, we cut the connector off so we could run the wires under the dash, and connected the wires back together and now not working. Tried switching the wires, I think the ground in the tach pulled out.

__________________
www.facebook.com/keithminnicksracing www.facebook.com/fast-fabrication
KMR thanks its sponsors FK Rod Ends, Yukon Gear & Axle, KMC Wheels, Lucas Oil, PRP Seats, Rigid Industries, McQueen Prototype Designs, Sway-A-Way Shocks, Primo Powder Coating, Dana Sniff Transmisions, JuanCo Performance Engineering, General Tire, JBA Headers, Fragola Performance Systems, Powermaster Alternators, Russler II