Thanks for the very helpful instructions. My only problem was that the clutch pedal rod definitely would not "unsnap" from the master cylinder. It was held in by a black spring steel capture clip which was behind a circlip. I pulled until the circlip came out along with a white plastic part from inside the clutch cylinder. I was able to pry the black spring steel piece out of the plastic part to release the clutch pedal rod. Installation required compressing the circlip and pushing it back in. I'll try to post a picture of the end of the rod with the circlip. It may be necessary to reach into the end of the clutch master cylinder with circlip pliers to release the clutch pedal rod.