Thread
:
From stock to a plow rig and a couple mods inbetween. The story of plow rig. No 56k
View Single Post
10-22-2011, 12:56 PM
pooleo
Ban Survivor. (x2)
Join Date: Jun 2010
Posts: 6,764
From stock to a plow rig and a couple mods inbetween. The story of plow rig. No 56k
I thought I had a "build" thread for plow rig, but I dont. So, I am putting together a little page here. These are the pictures I have from the day I got the truck to where its at now. No pics of light bar build, or plow install or bumber build.
Day 1
Plow
From stock to here, I had mounted the plow. No pictures.
Next mod was the diamond plate tono cover.
Then did the OHC mod.
Explorer center console and power buckets.
Repair on the floor with fiberglass. And bed lined floor.
Installed Cab lights.
Replaced the 4th and final shackle mount. Installed 2" leveling kit.
before
after
Power upgrade for plow and seperate internal power.
Replaced Clutch, all u-joints, re-gear to 3.73 L/S from 3.27 Open
Other things I did was gauge pod install on piller. (oil/temp) White cluster swap with blue LEDs. Custom rear bumper build.
__________________
1999 | Ext. Cab | 4.0 | 4x4 | 4.10's
Quote:
A Gladiator does not fear death. He embraces it. Caresses it. Fucks it. Each time he enters the arena, he slips his c0ck in the mouth of the beast, and prays to thrust home before the jaws snap shut. - Oenomaus
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install
pooleo
View Public Profile
Send a private message to pooleo
Find all posts by pooleo
Register and never see these ads again.