View Single Post
 
Old 10-11-2011, 03:27 PM
1 SIK RANGER 1 SIK RANGER is offline
2002 Ranger Edge
 
Join Date: Oct 2011
Posts: 432
Default Re: Parking Brake cable install problem

I had the same thing happen to my 2002, I ended up pulling the assembly out and taking it down to the ford dealership. They pulled the cable while the assembly in a vice. It is spring loaded so it will self tension. You have to do the same, after you get the cable to where it can be removed, and yes, it is going to take alot of pullin power, you have to put a pin in that you leave in until you get the assembly re installed and the new cable is hooked up to the existing cable. You than pull the alignment pin, and it will tighten the system.
Reply With Quote