Quote:
Originally Posted by armymech2
It will not start cold, I did a tune up and found the spark plugs were not gaped right they were at .32 instead of .52 to .56, changed the air and fuel filter checked the vacuum lines new plug wires and check the coil pack. It will not stay started long enough for me to take it and have the codes read.
|
I believe you can pull them yourself if it is a '93 - still OBD-I, but 3 digit codes.
Troublcodes.net Trouble Codes OBD & OBD2 Trouble Codes and Technical info & Tool Store. By BAT Auto Technical
There are 4 diagrams on the top of that page, you won't need the test light or volt meter if your check engine light works. Just need to follow the bottom diagram or picture, hook up a jumper made out of a small piece of wire, and follow the instructions.
Pete