View Single Post
 
Old 08-11-2011, 04:46 PM
Redranger45 Redranger45 is offline
Ford Ranger Owner
 
Join Date: May 2011
Posts: 56
Default Replacing Valve Body Gasket

I am replacing the valve body gasket in my transmission this weekend. I have already changed filter and fluid and still have the same symptoms. Car is slow to go into drive or will not but if I shift into first it will go into gear. If I have been driving and stop at a light it almost always takes off in drive no problem. Usually only have this problem when first starting up. Sometimes engagues in gear really hard no matter what gear I start off in. Also pretty consistant that if I shift into drive at startup it will not engage and engine will rev up without moving and if I then let off of gas and wait the car will enague in drive in a few seconds.

Going to try changing the valve body gasket. Is there anything else I should change once in there?
__________________
1999 Ford Ranger XLT 4 door, 2 wheel drive, 6 cylinder 3.0 flex fuel engine with ac.
Reply With Quote