Re: timing belt
Quote:
Originally Posted by bigboy250
sorry been a long day .i set the marks back,and it still wiil not start,it is acting like it is not getting any fuel to the injectors. they are not powering up. i went back and reset the marks.and still the same.
|
you have to make sure the marks are correct. I have not done one myself but I think you use the marks that are on the rear timing belt cover. some people have complained about ford putting 2 sets of marks and confusing people. also if the mark on the cam is off a little try spinning it 360 degrees. the cam goes around twice for one crank. your oil pump has to be line up perfect because the cam sensor runs off of that.......
__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)
2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).
|