Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-05-2013, 10:13 AM
galaxy500 galaxy500 is offline
Learning to use the forums
 
Join Date: Oct 2012
Posts: 10
Default Ignition problem

Car seems to run fine but check engine light is on. used to be on intermittently but is now on all the time. Had a tune up in the fall when mechanic pulled a 224 code off. He said the 224 code went away and the CEL was still on due to my need of a new catalytic converter. Well I fixed the converter and the CEL was still on so I decided to learn how to read the codes my self. In KOEOff mode i got 111 (system pass) and 224 in continuous memory. In KOEOn mode I get a 998 (limp home mode?) Since I had new plugs and wires installed in the fall I decided to check the coil packs. Well I noticed the left 2 wires on the front coil pack were not firing/sparking so I installed a new coil pack there to fix it but I'm getting same problem - left 2 wires dont spark. I'm new to working on cars so not sure where to go from here. Would the next logical thing to check be the ICM?
thanks in advance!
__________________
93' Ranger XLT Longbed 2WD w/ 2.3L engine from '96 ranger 223k miles
Reply With Quote
Reply

Tags
1993, 2.3l, coil, icm, pack

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
ignition problem stranger76 3.0 Vulcan Tech 0 01-07-2013 10:15 AM
Ignition problem ds2992 4-Cylinder Tech 9 08-17-2012 01:27 PM
89 ranger ignition problem i think i need help liseltzer 4-Cylinder Tech 0 07-26-2012 04:43 AM
New Here. Please help with ignition problem! potatoheadman 4-Cylinder Tech 0 01-31-2012 04:33 PM
Ignition switch problem Choffman81 General Tech 0 03-06-2011 01:44 PM