Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-19-2013, 06:16 PM
Dondonvito Dondonvito is offline
Learning to use the forums
 
Join Date: Apr 2013
Posts: 3
Default 93 ford ranger

Hard in to 1st grinds into reverse what to do
Reply With Quote
  #2  
Old 04-19-2013, 06:18 PM
96_4x4_XLT 96_4x4_XLT is offline
Ford Ranger Driver
 
Join Date: Mar 2013
Posts: 6,189
Default

might need a slave or a clutch
Or just a bleed
How stuff is the pedal
Assuming you have a 5 speed
__________________
95 Ranger XLT 4x2 2.3 I4 5 speed 206,000 *dead*
96 Ranger XLT 4x4 4.0 V6 5 speed 173,000 *alive*
D35 front, 8.8 rear, 3.73 gears, limited slip rear diff
Reply With Quote
  #3  
Old 04-19-2013, 06:24 PM
Dondonvito Dondonvito is offline
Learning to use the forums
 
Join Date: Apr 2013
Posts: 3
Default

Semi stiff I gues I can push it to the floor with hand and arm

----------

clutch is strong when I start to put in gear it starts to roll forward but doesnt go in to gear
Reply With Quote
  #4  
Old 04-20-2013, 04:45 AM
tomboy tomboy is offline
Ford Ranger Driver
 
Join Date: Nov 2011
Posts: 1,664
Default Re: 93 ford ranger

It could be the clutch not fully disingauging, or the pilot bearing may be shot keeping the input shaft turning with the engine.
Reply With Quote
  #5  
Old 04-20-2013, 05:33 AM
Gilbertm Gilbertm is offline
Ford Motor Company
 
Join Date: Mar 2013
Posts: 137
Default

I have the same issue with my 2003. Not as bad now, but the warmer it gets the worst it gets... I changed the trams fluid( thus seemed to help quiet a bit) them we actually jacked up the left side if the truck about 2 feet and bled the clutch that way and it really Seemed to help.... I do still have the problem though when it get it operating temp... Ill let u know If I find anything else
Reply With Quote
  #6  
Old 04-20-2013, 06:08 AM
Dondonvito Dondonvito is offline
Learning to use the forums
 
Join Date: Apr 2013
Posts: 3
Default

Tomboy it kinda seems like that
Reply With Quote
  #7  
Old 04-20-2013, 07:11 AM
adamhos adamhos is offline
Ford Pickup
 
Join Date: Apr 2013
Posts: 115
Default

Most likely the pilot bearing
Could be hydraulic issue
And maybe the syncros in tranny itself
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford Taurus Swap in Ford Ranger Questions KiddLenny General Tech 16 11-11-2013 12:38 PM
1994 ford ranger / 1996 ford explorer - ok, i give up... worthspending 4.0 SOHC / 4.0 OHV Tech 0 09-15-2012 06:37 PM
For Trade: 1990 FULLSIZE Ford Bronco (300 inline 6, 5 spd manual) for Ford Ranger 4x4 WildlandFirefighter Trucks 0 02-25-2011 08:30 PM
FORD MECHANICS and OWNERS?? 1997 ford ranger? clarencekali86 General Ford Ranger Discussion 9 05-28-2009 07:08 PM
will the parts from a 90 ford ranger interchange with a 83 ford ranger? kenzsmommy General Tech 6 11-26-2008 11:25 AM