|
06-14-2012, 12:41 PM
|
Ford Ranger Driver
|
|
Join Date: Sep 2010
Posts: 1,196
|
|
Where is the PCV valve at?? 2010 4cyl
2010 4 cyl 2.3L manual tranny w/reverse.
Where is the PCV valve located at and how do I swap in a new one?? is this a maintenance item that must be replaced like every 90 thousand miles or only if ranger gives problems....
__________________
2010 Ranger XL Reg. Cab 4 cyl... 5 speed manual... W/reverse.
Mods: 5% tint on rear window, JVC KDHDR40 Headunit, Kicker KS-68 speakers, Kicker TCVT102 (10TCVT102) Sub, JVC DRVN KSAX3102 Amp, JVC DRVN KSAX3101D mono amp, Ford black rubber mat, White LED license plate lights. Added 6000k HID Fogs, 6000k Digital HID Heads.
This isn't gramhar skool so dont cry and whine about spelling.
|
Register and never see these ads again. |
|
06-14-2012, 02:56 PM
|
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 14
|
|
Re: Where is the PCV valve at?? 2010 4cyl
its inserted between two hoses, one come from under neath the throttle body and then goes down the drivers side of the engine bay, that where its connect to another hose that goes down under the intake manifold. its that little plastic piece connecting the hoses.
|
06-14-2012, 06:14 PM
|
Ford Ranger Driver
|
|
Join Date: Sep 2010
Posts: 1,196
|
|
Re: Where is the PCV valve at?? 2010 4cyl
maintenance item or change only if there is any problems??
__________________
2010 Ranger XL Reg. Cab 4 cyl... 5 speed manual... W/reverse.
Mods: 5% tint on rear window, JVC KDHDR40 Headunit, Kicker KS-68 speakers, Kicker TCVT102 (10TCVT102) Sub, JVC DRVN KSAX3102 Amp, JVC DRVN KSAX3101D mono amp, Ford black rubber mat, White LED license plate lights. Added 6000k HID Fogs, 6000k Digital HID Heads.
This isn't gramhar skool so dont cry and whine about spelling.
|
06-15-2012, 05:41 PM
|
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 14
|
|
Re: Where is the PCV valve at?? 2010 4cyl
might as well replace it, doesnt hurt any
|
06-15-2012, 10:05 PM
|
Ford Ranger Driver
|
|
Join Date: Sep 2010
Posts: 1,196
|
|
Re: Where is the PCV valve at?? 2010 4cyl
any how to on how to replace it??? is it the one that looks to have this plastic retainer clip on IT??
__________________
2010 Ranger XL Reg. Cab 4 cyl... 5 speed manual... W/reverse.
Mods: 5% tint on rear window, JVC KDHDR40 Headunit, Kicker KS-68 speakers, Kicker TCVT102 (10TCVT102) Sub, JVC DRVN KSAX3102 Amp, JVC DRVN KSAX3101D mono amp, Ford black rubber mat, White LED license plate lights. Added 6000k HID Fogs, 6000k Digital HID Heads.
This isn't gramhar skool so dont cry and whine about spelling.
|
06-16-2012, 01:22 PM
|
|
Ford Ranger Driver
|
|
Join Date: Sep 2010
Posts: 3,182
|
|
Re: Where is the PCV valve at?? 2010 4cyl
Quote:
Originally Posted by evilchickenman
might as well replace it, doesnt hurt any
|
Might as well replace something that doesn'r need to be replaced????
__________________
|
06-18-2012, 04:38 PM
|
Liking the Ford Ranger Forum
|
|
Join Date: Aug 2010
Posts: 17
|
|
Re: Where is the PCV valve at?? 2010 4cyl
It would be great if one of you guys would take a photo of the PCV valve, and post it, in place. Sometimes it's easier for people to visualize. Thanks and keep up the good work.
__________________
2005 Ranger XLT 2.3L 5-spd
|
06-22-2012, 04:07 PM
|
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 14
|
|
Re: Where is the PCV valve at?? 2010 4cyl
|
06-27-2012, 12:12 AM
|
Ford Ranger Driver
|
|
Join Date: Sep 2010
Posts: 1,196
|
|
Re: Where is the PCV valve at?? 2010 4cyl
are you for reals?? where is the PCV valve in the engine bay under the hood?
__________________
2010 Ranger XL Reg. Cab 4 cyl... 5 speed manual... W/reverse.
Mods: 5% tint on rear window, JVC KDHDR40 Headunit, Kicker KS-68 speakers, Kicker TCVT102 (10TCVT102) Sub, JVC DRVN KSAX3102 Amp, JVC DRVN KSAX3101D mono amp, Ford black rubber mat, White LED license plate lights. Added 6000k HID Fogs, 6000k Digital HID Heads.
This isn't gramhar skool so dont cry and whine about spelling.
|
06-27-2012, 12:19 AM
|
|
Sellout
|
|
Join Date: Apr 2011
Posts: 2,449
|
|
Re: Where is the PCV valve at?? 2010 4cyl
I had to take off the drivers side tire and fender well to get to mine. Was the easiest way. You pretty much have to go in from the side to get to it. As for replace or clean, I say check it first, if you dont need the truck for a couple days. If it needs replaced you won't find it at an auto parts store that won't have to overnight it. Will run you $25-$35.
----------
Quote:
Originally Posted by evilchickenman
|
That's not it. Ours is black and an elbow
----------
Quote:
Originally Posted by 2010
any how to on how to replace it??? is it the one that looks to have this plastic retainer clip on IT??
|
It does have a plastic retainer clip, orange I believe
__________________
2012 Ford F150 XL
2wd, 3.7 V6
Stock For Now
|
06-27-2012, 03:31 AM
|
|
3.0 Lightning
|
|
Join Date: Nov 2009
Posts: 272
|
|
Re: Where is the PCV valve at?? 2010 4cyl
I am not too familiar with the 4 cylinder rangers, but maybe this can help? http://www.fordrangerforum.com/3-0-v...-few-tips.html
__________________
Red 2001 Ford Ranger 3.0L XLT, Mods: Throttle Cable Mod, Composite Manifold Conversion, 67mm Throttle Body, Exhaust Dumped behind Cats, EGR Delete, MAF Mount, Electric Fan Swap, Super Chips Tuner, Transmission Cooler, Overhead console, V-Line V713 Sledge 16" Rims w/ PIRELLI Scorpion ATR's, Chrome Surestep Bumper, DUAL 550BT Receiver w/ Bluetooth, 12" Pioneer & 10" Sony Xplod Stacked Truck Boxes with 1200watt BOSS Amp, Optima Yellow Top, Painted Radio Bezel, OHC, and Door Handles.
|
06-27-2012, 12:35 PM
|
|
Sellout
|
|
Join Date: Apr 2011
Posts: 2,449
|
|
Re: Where is the PCV valve at?? 2010 4cyl
I wish ours were that easy^^^
That was on an older truck and in a different location. His was only $3 too. That makes me mad...
__________________
2012 Ford F150 XL
2wd, 3.7 V6
Stock For Now
|
06-27-2012, 12:53 PM
|
|
<<< Husky the High Dog!
|
|
Join Date: Jan 2012
Posts: 7,181
|
|
Re: Where is the PCV valve at?? 2010 4cyl
to get to mine (99 4 banger) it's easiest to get your hands in there through the driver side wheel well.
----------
funny, i figured somebody would chime in with the typical 'pcv valves are ALWAYS somewhere on the valve cover', but that is not the case for mine, at least. it sits on top of an 'oil separator' canister and is way below the valve cover.
|
06-28-2012, 03:22 AM
|
|
Learning to use the forums
|
|
Join Date: May 2012
Posts: 14
|
|
Re: Where is the PCV valve at?? 2010 4cyl
on the 2.3l ranger its located on the driver side of the engine bay, to get to it follow the hose on the bottom of the throttle body, it should lead to the back on the intake and youll see a white plastic peice connecting the two hoses, and that is the pcv valve
|
06-28-2012, 07:59 AM
|
|
<<< Husky the High Dog!
|
|
Join Date: Jan 2012
Posts: 7,181
|
|
Re: Where is the PCV valve at?? 2010 4cyl
Quote:
Originally Posted by evilchickenman
on the 2.3l ranger its located on the driver side of the engine bay, to get to it follow the hose on the bottom of the throttle body, it should lead to the back on the intake and youll see a white plastic peice connecting the two hoses, and that is the pcv valve
|
i gots a question...
so, on your 2.3, where does the hose on the other end of the pcv valve actually connect to? the crank case?
|
|
|