Truck still wont start all new ignition parts
I put a post a while back about breaking a wire while I swapped my ignition control module...well I found it...it was a bare copper wire running from one harness to another, so anyway a spliced it and the truck still wont start. I have put all new coils, plugs, wires, ignition control module, injectors, fuel filter, battery, alternator, egr valve, idle air control valve,....I have power, and it cranks and gets fuel but no spark, so now what? Its a truck I got for my mom and just decided to replace things that would possibly need it in the near future. It ran fine until that wire broke and thats when I started not getting spark, even after I found and fixed it. What do I look for now?
Last edited by rumpranger; 01-04-2010 at 04:42 PM.
|