Engine hard to start and runs rough when started
I changed the fuel rail today and also fixed a hole in the pipe between EGR and exhaust manifold. I put everything back together but truck is hard to start and when running is very rough. Everything seems to be connected but I removed a part at back left side of the engine that had 2 hoses on the bottom and an electrical connection. This part was corroded where the hoses connected and I don't know if the seal is good. What is this part and could this be my problem? I checked the fuel at the fuel rail and seem to have plenty. Thanks for any information.
__________________
1996 Ranger 2.3, 5 speed, stock.
|