hello guys new to this hope im in the right place. I have a 1992 ford ranger 2.3 2wd ford ranger is very rough running changed 1 coil pack because i found a broken plug on the back changed the control module new plus new wires checked the plugs 3 times now cleaned and re-gapped them to be sure both coil packs have good fire but still is ruough running thanks guys

__________________
1968 ford ranger 390 bored 60 over inherited from father in law been parked in a pasture for 5 yrs needs a lot of body work but motor runs great just had a few hicups when first started. and a 1992 ranger xlt 2.3 2wd factory 273,000 miles and counting

had the same problem, turned out to be a timing problem.

__________________
1989 xlt 4x4 "problem child" ranger
2.9 ltr KnN cold air intake, 88 2.9 throttle body
jvc stereo, kicker speaker 6x9s, 2 12 kenwoods with 1000 watt kicker amp and 4 gauge wiring. 153.2 decibels. My baby the Ranger

some thoughts to consider

-clean TB, IACV, egr,

-check for vacuum leaks,

- check intake and air filter

-change fuel filter

-pcv valve?

-do you have codes or pending codes

-add a bottle of Techron to the tank after the fuel filter change

__________________
2004 Ext Cab, 4WD, 4.0, Auto, 154k. (4.0 engine is out of a 2009 Ranger w/96k) ( as of 7/1/2017)

2004 Ranger, Ext Cab, 2WD, 3.0, 5 speed , 4WABS, crank windows, no cruise, Edge 116k.(6/5,2014) (SOLD).
1999 Ford Ranger, Reg Cab, 2.5, 5 speed, 2WD, no AC, 150k (SOLD).

Havent had it hooked up to a machine yet, control module took care of check engine light. Will the machine pick up anything without the check engine light being on.

__________________
1968 ford ranger 390 bored 60 over inherited from father in law been parked in a pasture for 5 yrs needs a lot of body work but motor runs great just had a few hicups when first started. and a 1992 ranger xlt 2.3 2wd factory 273,000 miles and counting