Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 07-26-2011, 03:49 PM
BigYinUK BigYinUK is offline
Learning to use the forums
Join Date: Jul 2011
Posts: 1
Default Pump Speed Signal Fault Error

Hi all

Apologies for this being my first post.

I have a 2004 Ranger XLT Thunder Pickup (UK).

All was well with it until today when the glow light started flashing.

I checked the actual error code which was showed as P1189 - Pump Speed Signal Fault.

I've seen a couple of threads on this error but no actual conclusion to what was/might be wrong or what the fix was.

I should say that there are no other symptoms except for the error code. The car starts first click and performs fine.

Any ideas where I should start looking?

Also where is the fuel pump on this model (I might try cleaning the sensor)?

Regards all
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Is the fuel pump in my '86 two wheel ranger an in-line pump? Josh C General Tech 3 07-09-2012 09:20 AM
ABS light: finding fault code, repairing? BerniniCaCO3 Electrical Tech 8 05-24-2011 05:23 PM
No spark and no fault code ??? metalmole 4.0 SOHC / 4.0 OHV Tech 2 04-27-2011 03:19 AM
Fault code 629 and 566? blindman_10 Drivetrain Tech 1 03-02-2010 09:30 PM
Ranger fourwheeldrive fault les riley Introduce Yourself 1 02-04-2010 08:19 PM