Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 04-25-2011, 10:16 PM
jbneurotech jbneurotech is offline
jbneurotech
 
Join Date: Mar 2011
Posts: 4
Default egr metal tube/pipe broke?

was replacing valve cover gasket and plugs, i was trying to move the egr metal pipe/tube (runs to exhaust) far enough out of the way to get the valve cover back on and it snapped right in the middle at the bend and also at the nut down where it attaches to the exhaust, how screwed am i, you cant find these metal pipes anywhere on the internet have been searching for hours, is there any high temp hose i could use in place of it or just cap it off at the exhaust with 5/8 flare, any suggestion would be great i have the 93 2.3 xlt if that helps?
__________________
1993, 2.3l supercab 2wd
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
egr tube removal? jbneurotech 4-Cylinder Tech 5 06-27-2012 06:10 PM
EGR Exhuast tube Fitting size stedman 4-Cylinder Tech 6 12-10-2010 09:39 AM
Help, please. wire broke rumpranger 4-Cylinder Tech 3 01-03-2010 05:07 PM
egr tube won't remove lazsensor General Tech 4 11-04-2009 09:27 AM
I think its broke....:( baldy3220 4-Cylinder Tech 3 09-03-2009 08:13 AM