|
10-22-2009, 04:10 PM
|
Learning to use the forums
|
|
Join Date: Oct 2009
Posts: 2
|
|
Problem with guages on 2.3
I have a 1990 2.3, and my fuel and temp guages dont work I know there is power going to them because they move counter-clockwise when the truck is on, but they don't indicate the right fuel level or engine temp, i was wondering if i should check the sensors, cabling, and such, and where the deuce these sensors are?!? please help
|
Register and never see these ads again. |
|
10-22-2009, 05:15 PM
|
|
smsranger
|
|
Join Date: Oct 2009
Posts: 536
|
|
have u made any modifications? or did u get the truck like that?
__________________
iv got a 94 ford ranger. most baisic truck u can ever get. no power stearing. manual locks and windows. got a JVC KDR200, with a pair of Pyle 6" X 8" Blue Label 3-Way Speakers and wired an antennna. its a 2.3L 4 banger, with a 5 speed manual transmission. it had 117,400 miles on it wen i got it. i plan on dropping it a few inches. in the procces of repainting the interior. i want new headlights and taillights and paint my factory rims black. plan on getting a cheap sub and put in it.
|
10-25-2009, 08:20 AM
|
Learning to use the forums
|
|
Join Date: Oct 2009
Posts: 2
|
|
no mods, got the truck used for really cheap, gauges never worked...
|
12-30-2009, 07:10 PM
|
Learning to use the forums
|
|
Join Date: Dec 2009
Posts: 5
|
|
i would like to know this as well.
i just bought a 95 ranger splash and the fuel gauge and temp gauge seem to be on crack.
fuel reads empty and temp reads full-blast-over-heating-OMFG-batman hot.
|
01-05-2010, 06:51 PM
|
|
Exploder
|
|
Join Date: Jan 2010
Posts: 272
|
|
i have the same problem aswell i just got a 94 ranger and replaced the sending unit and fuel pump and no matter how much gas goes it , it shows i only have a 1/4 tank of gas
|
01-10-2010, 02:56 PM
|
Learning to use the forums
|
|
Join Date: Jan 2010
Posts: 1
|
|
Quote:
Originally Posted by Port91
I have a 1990 2.3, and my fuel and temp guages dont work I know there is power going to them because they move counter-clockwise when the truck is on, but they don't indicate the right fuel level or engine temp, i was wondering if i should check the sensors, cabling, and such, and where the deuce these sensors are?!? please help
|
First off I'm no mechanic but I'm trying to fix a similar problem. The fuel thing sounds like a float switch problem in the tank. The temp sensor is at the drivers side engine block. If you get underneath the vehicle and look up you can see the single wire sensor/sender.
You can also see the oil pressure sending unit. If I recall this as a tube. I can check if you need more info.
Mike
|
01-11-2010, 09:54 AM
|
|
Exploder
|
|
Join Date: Jan 2010
Posts: 272
|
|
On mine which is a 94 i just put in a new sending unit and fuel pump and still problems , unless i guess its possible there could be problems with the float or electrical , is it possible that the guage could be faulty because mine stayes at 1/4 no matter how much i got in
|
01-29-2010, 10:20 AM
|
|
Still Tickin!
|
|
Join Date: Oct 2009
Posts: 22
|
|
Oh man... I am having the SAME problem with mine! I got a 1995 4 cyl. 5-speed and is ALWAYS on "EMPTY" Of course the "Check Guage" light NEVER goes out. This means I have to guess how much gas I have in there.
I can't tell you how many times I have been driving in the middle of nowhere and the thing sputters... "FEED ME SEYMOUR!!" of course, then I start praying my hiney off to make it to a gas station. I would LOVE to get this problem resolved so I won't be stuck walking one of these days.
|
06-28-2010, 06:15 PM
|
Learning to use the forums
|
|
Join Date: Jun 2010
Posts: 13
|
|
Re: Problem with guages on 2.3
I dont know what the prob can be in all different cases but i just change my odometer and i have the other gages,if some one want them let me know.ARE FREE,just shipping Joe-
|
06-28-2010, 06:22 PM
|
Learning to use the forums
|
|
Join Date: Jun 2010
Posts: 13
|
|
Re: Problem with guages on 2.3
I forgot mine is a 96 no tach.Joe-
|
07-04-2010, 09:20 AM
|
|
Exploder
|
|
Join Date: Jan 2010
Posts: 272
|
|
Re: Problem with guages on 2.3
Well mine again the fuel guage not working properly
but now a new problem is my temp guage doesnt work , everytime i turn the engine on both guages move to the left
Could it be the actual dash cluster going bad or wiring or i actually have a problem with my temp guage
Its so anyoing cause i cant figure it out
__________________
96' Explorer XLT 4X4 4.0L
|
07-17-2010, 04:11 PM
|
Learning to use the forums
|
|
Join Date: Jul 2010
Posts: 3
|
|
Re: Problem with guages on 2.3
Hello Everyone- This is my first post here. I seem to have solved the same problem on my '93 2.3L 5spd. I took the instrument cluster out and cleaned all of the electrical connections. The problem seemed to be on a device that looks to me like a voltage regulator for the guages. The fix was about 2 yrs ago, I've had no problems since. Good luck everyone!
|
03-23-2011, 10:41 PM
|
|
Liking the Ford Ranger Forum
|
|
Join Date: Mar 2011
Posts: 29
|
|
Re: Problem with guages on 2.3
I Have a 96 3.0 5 speed and my temp gauge will not reach the middle and normally sits @ 1/4 or under the lil boat.. The Gauge will do what I call a lil Tweeker Twitch or move up and down very quickly off and on while driving or sitting.. its not a constaint twitch... I just bought a Temp Sender Switch but im Not sure if its the same and gos in the same place as a coolent temp sensor.... Can Some one help Me out Please Should I replace some thing else.
|
03-24-2011, 09:21 AM
|
Like the Forums
|
|
Join Date: Apr 2010
Posts: 39
|
|
Re: Problem with guages on 2.3
i have a 90 also, my fuel gauge never worked until i took the bed off and put a new fuel pump, filter, and sending unit in, its in the gas tank, and now my fuel gauge is pretty accurate, and as for the temp gauge mine never goes past the dash rite after the c and before the normal, it gets to the N on normal if im running my ac but thats it, ive always wondered if it was accurate to but its never over heated or anything so im not worried about it
__________________
90 ranger, 2wd, flowmaster dual exhaust, 2.3l, roll pan, billet grill, clear corner lights and head lights, charcoal gray.
04 Mazda b3000 dual sport 2wd, stock for now hopefully lifting soon!
|
04-05-2011, 04:36 PM
|
Learning to use the forums
|
|
Join Date: Mar 2011
Posts: 5
|
|
Re: Problem with guages on 2.3
What's with the gauge issues? I own a 97xlt reg cab 2.3 4 cyl that I conervted to a 5speed...a few months after the conversion the speedo went psyco on me. It would jump around and then gave up on me. Shortly after my oil pressure gauge quit also. My odometer stopped at 180160 and won't turn anymore...I've had the gauge cluster out numerous times and cleaned all connections but still no luck....any feedback or advice as to what went wrong in there? Thanks!
|
Thread Tools |
Search this Thread |
|
|
|
|