Have a 2010 and would like to mount a mechanical oil pressure gauge. Is there a convenient 1/8" NPT port location on the engine for the tubing?

you could run a "T" fitting off the factory dummy gauge sending unit

__________________
1996 XLT 2.3T "White Lightning" 5/7 dropped, Turbo street toy
2006 FX4 Off Road, DD, work in progress
1985 XLT 2.8L 4x4 "The Black Pearl" (retired but still around)
1987 XL 2.3L 2wd R.I.P.

Thanks, anyone know location of the factory sending unit?

I know rwenzing did this to his 4.0, its probably pretty much the same process. you might want to wait for him to chime in.

__________________
2002 Ranger FX4
4.0L SOHC, 5R55E Auto, 4.10 8.8 Torsen, 31x10.5/15 BFG ATs

I have oil and water temp on mine. I just undid the facotry sender and plugged it in. This will of coarse make the factory idiot needle not work. I just grounded the wire so the gauge shows normal. Its a useless gauge to begin with. The sender on the 4.0 ohv is down under the pwr. steering pump. Dont know about other engines

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

we dont even have a gauge on our newer ones just gas and temp.

__________________
Dave K
2011 Ford Ranger 4x4 Sport 4.0L "Dixie"
Rancho Suspension/Auto/3.73's/Pinstriped/Flowmaster SS Exhaust.

FUTURE: 3' Body Lift/32's/Windshield Visor/Brush Guard.