Have a 2010 and would like to mount a mechanical oil pressure gauge. Is there a convenient 1/8" NPT port location on the engine for the tubing?

you could run a "T" fitting off the factory dummy gauge sending unit

__________________
1996 XLT 2.3L 2wd Factory "Hurst Special" 5/6 dropped street toy
1985 XLT 2.8L 4x4 "The Black Pearl"
1987 XL 2.3L 2wd R.I.P.

Thanks, anyone know location of the factory sending unit?

I know rwenzing did this to his 4.0, its probably pretty much the same process. you might want to wait for him to chime in.

__________________
2002 Ranger FX4
4.0L SOHC, 5R55E Auto, 4.10 8.8 Torsen, 31x10.5/15 BFG ATs

I have oil and water temp on mine. I just undid the facotry sender and plugged it in. This will of coarse make the factory idiot needle not work. I just grounded the wire so the gauge shows normal. Its a useless gauge to begin with. The sender on the 4.0 ohv is down under the pwr. steering pump. Dont know about other engines

__________________
Ball Joints/Upper A-Arms How To
Replace Door pin/bushing
Repair broken dome light tabs
VIDEO OHC Install

we dont even have a gauge on our newer ones just gas and temp.

__________________
Dave K
2011 Ford Ranger 4x4 Sport 4.0L "Dixie"
Rancho Suspension/Auto/3.73's/Pinstriped/Flowmaster SS Exhaust.

FUTURE: 3' Body Lift/32's/Windshield Visor/Brush Guard.