If you did not properly install the timing belt it is possible it jumped, but it would have to had jumped purty darn good to not start. I guess your motor is not a catastrophic/interference motor you lucked out there. Always start with the basics, time, spark, fuel, if you have these you should be in good shape. You should check that all engine connectors are fitted properly. If all is well then check your dash to see if the theft light is flashing. . . HTH
__________________
Current Mods
White gauges and Temp Cntrl, OHCw/Buggman LED mod,
Bosch +4, Accel Coil Pack, MSD6AL, Walbro, HiFlo Fuel filter,
Custom Ram Air, K&N, Ported / Matched intake, JBA 9mm wires,
Tweeked FPR, EBC 6k's, DynoMax-S CatBack, Jet-Chip, Reflex shocks,
New Anvil Mounts, Timbren's, Optima Yellow, DB 220A Alt. w/4g. jumper,
Western snow plow, More2Come
|