Hi guys I had to replace the brake line that goes from the rear drivers side ( near shock ) and connects to another line under the drivers door. It follows the chassis of the truck and is about 6 feet long. What wheel should I bleed since the pinhole leak in the line was after both rear wheels? Im afraid because of rust on the wheel cylinder bleeders so if I dont have to touch them, that would be great . the truck is a 99 2wd reg cab 2.5. thanks

1)Haynes Manual 36071 Ford Ranger 93-05


2) Bottle of DOT 3 brake fluid, Liquid wrench, a bleeder wrench since it's an exact fit. Or a pair of 10" inch curved jaw vise grips and replacement bleeders with 3/8-24 thread if that don't work out. Rust Shmust. It's gotta get done right or not at all.

__________________
08 4.0 Sport 4x4
Stock