Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 10-25-2010, 02:48 PM
velozp velozp is offline
Like the Forums
 
Join Date: Nov 2009
Posts: 41
Default brake bleeding

Hi guys I had to replace the brake line that goes from the rear drivers side ( near shock ) and connects to another line under the drivers door. It follows the chassis of the truck and is about 6 feet long. What wheel should I bleed since the pinhole leak in the line was after both rear wheels? Im afraid because of rust on the wheel cylinder bleeders so if I dont have to touch them, that would be great . the truck is a 99 2wd reg cab 2.5. thanks
Reply With Quote
  #2  
Old 10-25-2010, 05:10 PM
mickblock mickblock is offline
Get off my lawn
 
Join Date: Apr 2010
Posts: 1,059
Default Re: brake bleeding

1)Haynes Manual 36071 Ford Ranger 93-05


2) Bottle of DOT 3 brake fluid, Liquid wrench, a bleeder wrench since it's an exact fit. Or a pair of 10" inch curved jaw vise grips and replacement bleeders with 3/8-24 thread if that don't work out. Rust Shmust. It's gotta get done right or not at all.
__________________
08 4.0 Sport 4x4
Stock
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bleeding clutch master cylinder 4evermodding 3.0 Vulcan Tech 4 07-01-2010 04:54 AM
Trouble pre-bleeding a new brake master cylinder. CapeRanger General Tech 2 04-08-2010 12:59 PM
clutch repair or bleeding problem eric d Drivetrain Tech 2 01-19-2010 06:46 AM
Bleeding brakes Ranger01 General Tech 7 12-06-2009 09:19 AM
Need help bleeding clutch asap rmn42689 Drivetrain Tech 4 07-05-2009 09:32 PM