Quote:
Originally Posted by dlswanson41@gmail.com
I’ve replaced the “clutch pedal position switch” or I call it the “neutral safety switch” motor still will not crank. Then I replaced the starter and solenoid that didn’t work.. only crickets chirping when the key is turned not even clicking.. Btw, battery is fully charged and terminals are clean... someone please help!!!!
dlswanson41@gmail.com
|
I found the problem with my truck.. after replacing the starter and solenoid along with the new clutch safety switch.. I determined that the issue is between the ignition and the starter and knowing there is only one device between the two it must be an issue with the clutch and switch.. after further inspection I noticed the pedal had a lotta play to much in fact that the switch was being pushed beyond where it needs to be to allow the starter to engage.. So after some crafty wiring I'm able to with a flip of a switch start the truck without engaging the clutch and to allow my cruise to still function I flip the switch back and the computer sees the safety switch is in place and will engage the cruise function.... yasaaaay for me!!! Lol
The wires needed to bypass are pink/white and Pink or the two closest to the fire wall when the plug is on the safety switch...
dlswanson41@gmail.com