Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Thread Tools Search this Thread

Old 12-16-2017, 02:57 PM
rangersrock rangersrock is offline
Liking the Ford Ranger Forum
Join Date: Nov 2012
Posts: 16
Default Still getting code 224

Long story short....check engine light came on, then felt a rough idle at red lights and stop signs. Weak power going up hill too. Checked the code, it was the dreaded code 224. Had the mechanic change out the two coil packs with new ones. He said the original ones weren't that bad actually. Still check engine came on. Mechanic next replaced spark plugs and wires. Got more power, but check engine light still comes on. Only thing left to replace that I know of, is now the ICM. Any thoughts? Oh, its a 93 Ranger with 149,000 miles, 2.3L.
Reply With Quote
Old 12-23-2017, 10:29 AM
Maz B23 Maz B23 is offline
Learning to use the forums
Join Date: Jul 2015
Posts: 7
Default Re: Still getting code 224

Just curious if your mechanic checked to see if you have a clogged catalytic converter. Might be worth checking out, especially if it's the original.
Reply With Quote
Old 12-24-2017, 07:12 AM
tomw0 tomw0 is offline
Ford Ranger Driver
Join Date: Aug 2015
Posts: 806
Default Re: Still getting code 224

Read here:

FINALLY solved a stubborn 224 code!

Could be... cheaper than a new computer, for sure.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lean code and fuel circuit code louisvilleranger95 4.0 SOHC / 4.0 OHV Tech 16 01-13-2018 09:15 AM
p1443 code only code on my truck Danielr48888 4-Cylinder Tech 4 10-08-2014 01:37 PM
need help with a code Bubba Jay Off Topic 3 07-07-2014 04:47 AM
00 3.0 Air bag code joelm716 Electrical Tech 0 04-17-2012 06:28 PM
rcm code list?code 33 Anvil02 General Tech 0 04-10-2011 08:57 AM