Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 06-21-2010, 09:30 AM
gary petty gary petty is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 3
Unhappy 2000 ford ranger help

i have a 2000 frd ranger 2.5 engine, timing belt broke, put new one on and now she wont start, have tried new crankshft sensor, camshaft sensor, and new coil pks, hav e put it in time and it will try to start but wont, anyone have any ideas, would really like to get her running again, she has been down for 3 weeks, need my truck////
Reply With Quote
  #2  
Old 06-21-2010, 03:35 PM
joealex joealex is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 13
Default Re: 2000 ford ranger help

Is the engine turnning?do you have spark?have you line up the markins right? any damage in valves or pistons when belt broke.it can be a big deal.
Reply With Quote
  #3  
Old 06-22-2010, 01:07 AM
zvice32 zvice32 is offline
Liking the Ford Ranger Forum
 
Join Date: Jun 2010
Posts: 23
Default Re: 2000 ford ranger help

Did you run a compression test on all the cylinders?
Reply With Quote
  #4  
Old 06-22-2010, 09:36 AM
gary petty gary petty is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 3
Question Re: 2000 ford ranger help

Quote:
Originally Posted by joealex View Post
Is the engine turnning?do you have spark?have you line up the markins right? any damage in valves or pistons when belt broke.it can be a big deal.
yes the motor is turning, have spark, all marks are lined up,no damage to valves or pistons, on the harmonic balance there is a wide gap between teeth and when trying to remove it the gear behind it moved and now by the book it is 2 teeth out of line, could that be the problem?
Reply With Quote
  #5  
Old 06-22-2010, 09:37 AM
gary petty gary petty is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 3
Default Re: 2000 ford ranger help

Quote:
Originally Posted by zvice32 View Post
Did you run a compression test on all the cylinders?
have run test and it is between 140 and 160 for each one
Reply With Quote
  #6  
Old 06-22-2010, 02:39 PM
joealex joealex is offline
Learning to use the forums
 
Join Date: Jun 2010
Posts: 13
Default Re: 2000 ford ranger help

It can be,that happen to me rebuilding my son suzuki,be sure that the 1st cyl is at top,even if the marks are good you might be 180 degrees out at the cam.hope helps Joe
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
2000 ford ranger Lilpowerranger Introduce Yourself 5 05-15-2009 02:31 PM
2000 Ford Ranger Tires? Mike B Wheels and Tires 1 02-02-2009 04:37 PM
Why will my 2000 Ford Ranger not start? lisa k General Ford Ranger Discussion 1 01-29-2009 01:23 PM
ford ranger 2000..............? Tony J General Ford Ranger Discussion 2 12-28-2008 02:40 PM
2000 Ford Ranger exhaust? navyhubby333 Exhaust and Mufflers 1 11-29-2008 04:09 PM