Ford Ranger Forum - Forums for Ford Ranger enthusiasts!

Go Back   Ford Ranger Forum - Forums for Ford Ranger enthusiasts! > >
Forgot Password? Join Us!

Welcome to Ford Ranger Forum

Reply
 
Thread Tools Search this Thread

  #1  
Old 05-22-2015, 02:42 PM
JSpohr JSpohr is offline
Learning to use the forums
 
Join Date: Aug 2013
Posts: 7
Default Help with Check Engine Light Codes 32, 65, and 38

I have a 94 XLT 2.3 and I just did a KOER test on my truck. My check engine light comes on for a little while and then turns off while i'm driving it. Sometimes it stays on for the whole drive and sometimes it doesn't turn on at all. When I did the KOER test I got check engine light codes 32, 65, and 38, in that order. Code 32 says "EGR not controlling", code 65 says "Transmission Control Switch/Overdrive Cancel Switch did not change states", and code 38 says, "DC motor idle speed control/idle tracking throttle position sensor open circuit." How severe are these problems and are they related to each other?
__________________
94 Ranger XLT 2.3L 2WD. 227,000 Miles
Reply With Quote
Reply

Tags
check engine, codes, egr valve, idle

Thread Tools Search this Thread
Search this Thread:

Advanced Search


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pulled 6 different codes from engine check light 1-1-Six Electrical Tech 0 10-03-2012 08:28 PM
6 Codes pulled from Check Engine Light!! Frostyballz 4.0 SOHC / 4.0 OHV Tech 10 05-25-2012 10:09 PM
Check Engine Light Flashing Codes Help (VIDEO)?? ZohanisBack 4-Cylinder Tech 2 11-17-2011 05:56 AM
check engine light codes help??? please huffa12 General Ford Ranger Discussion 14 12-30-2010 06:19 PM
Check Engine Light? - Misfire with no codes? - I can help Solo V8 4G 4.0 SOHC / 4.0 OHV Tech 4 10-25-2010 07:12 PM