Okay, so here's the deal. I'm tired of the idiot gauge in my truck and I would actually like to have a working oil pressure gauge to go off of. I already have the gauge, but I'm trying to figure out which sender I need to swap my stock one with so it will function properly. Has anyone attempted this swap? I checked around the forum first, but it just seems like the PS60 seems too big. Any help is appreciated!

__________________
1993 XLT 2.3 Single cab 2wd
Used to be lifted, but now low and slow. Flipped hangers and cut coils up front for 2/2 drop. Soon to be 3/4, 17x8, 235/45/17 up front, 245/45/17 in the rear 300K+ miles
My Build Thread:[url]http://www.fordrangerforum.com/project-logs/89577-jldanger-rangers-build-thread.html[/url

What I've seen people do on here is get a adapter plate that goes between the filter and filter housing or t off the oem sending unit. To add the one for the mechanical gauge.

__________________
97 ranger reg cab 2.3 5 speed. 2 wd no ac. Mods after market jvc head unit & throttle cable. 06 mirror upgrade.

So basically I could just screw the tee into the block, and attach both senders to it? Seems easy

__________________
1993 XLT 2.3 Single cab 2wd
Used to be lifted, but now low and slow. Flipped hangers and cut coils up front for 2/2 drop. Soon to be 3/4, 17x8, 235/45/17 up front, 245/45/17 in the rear 300K+ miles
My Build Thread:[url]http://www.fordrangerforum.com/project-logs/89577-jldanger-rangers-build-thread.html[/url

Yep

__________________
97 ranger reg cab 2.3 5 speed. 2 wd no ac. Mods after market jvc head unit & throttle cable. 06 mirror upgrade.