On my 89 2.3l, ther is a box,canister,etc underneath the intake manifold that my pcv hose connects to. It is very loose, flops around, and i am able to pull it right out of the hole in the block! I have a "parts engine that has this on it, but I am unable to get it to budge. I guess my question is: How is this secured to the block? An open hole into the crankcase is wide open for dust,dirt,trash,water,ect. to enter.
Any help is geatly appreciated.
1989 Ranger 2.3l 5 speed 2WD.