Does anybody know how to reset computor so the CHECK ENGINE light will go out-I thought that if you disconnect the battery and then reconnect it would do the trick but only for a short time-I have had it read with a snap-on diagnostic thing and it said both banks were lean-I have changed three ox sensors -IAT-Wiped the MAF sensor with achohol- And changed the temp sensor by the termastat (the one with two wires)-also changed fuel filter -now I would like to reset CHECK ENGINE- but can't find out how--Thanks Rich
The original problem is the motor idles at 1200rpm when warm and check engine light came on-Car runs good and strong have sprayed ether around intake to see if there was intake leak? NO leaks
-

If you did use a diagnostic tool(scan tool), it should have a clear code button/function to clear the code on the truck.

__________________
'01 XLT disguised as a '03 Fx4 Level II.