Ignition control module
I have a 98 Mazda B4000 and am getting a code stating that there is misfire and that the ignition control module (ICM) may be the issue. I have replaces plugs, wires, and the coil but am still getting the same code.
Since I have already replaced everything else I am assuming it's the ICM that is the problem. Is there any know way to fix the module on my own due to common failures like capacitor or resistor? I would like to fix it on my own if possible and not drop $150+ on a new ICM.
I tried searching but am limited on the results because I'm on my phone. Thanks for any help y'all can provide.
|