I broke off the end of the drain plug. There was still some left to unscrew it but how do I get it all the way out?

should I just grab what is left with some vice grips and pull it out.
I just did not what to brake it more and end up with a real problem.

__________________
2000 reg cab 4x4 with 4.0 and auto trans

worry about it when you have to drain it - jb weld it I dont know

__________________
03 ranger 4x4 4.0 LTX v6 sohc super cab xlt

I popped it out and replaced with a new one from autozone $4

just was a bit scared that it was going to brake off in there

__________________
2000 reg cab 4x4 with 4.0 and auto trans

yeah i just did the same thing. how did you get it out and replace it?

I also did this. Any update on how any of you guys got it out?

__________________
2003 Ranger 4Cyl 2.3L XL Styleside bed
Pioneer DEH-3100UB, Lund Genesis Tonneau, grill painted black, black front emblem, clear corners, ultra-guage, LED cluster.

Jb weld works great for this. Put a little on both ends, wait for it to set in a couple hours and gently twist out

Sent from my iPhone using FRF App

__________________
99 xlt supercab xlt 4.0l ohv 4x4
mirror tint all around
2 piaa 580 lights and 2 220w dick cepek lights
100w pa system
2"front/1.5 rear lift
1 10" pioneer champion sub/ 1800w jl amp/ kenwood HU
31x10.5x15 Pegasus A/T