Not my truck, but helping someone out. Got codes for MAF and transmission speed sensor. Truck was idling rough and the transmission does seem to shift a little harsh. Replaced the MAF no problem. But where is this transmission speed sensor and how hard is it to replace? This is a 94 Ranger with the 4.0L V6.

its on the driver side. about middle ways. mine had one screw in it.

__________________
Mud holes are like a pretty woman with an std, you want to hit but are scared of the consequences!

4wd is like a condom. i'd rather have it and not need it rather tan needing it and not having it!

So do I need to lift the truck to get to this? not familiar with these trucks, obviously. So you just unscrew it and disconnect a wire harness of some sort, simple as that?

ya the put the new one on and hook the wires back to it. you don't need to jack it up at all unless you can't get under the truck

__________________
Mud holes are like a pretty woman with an std, you want to hit but are scared of the consequences!

4wd is like a condom. i'd rather have it and not need it rather tan needing it and not having it!

Thanks for the info, that helps. so I'm guessing you had this same code with the transmission acting up some? Did replacing the sensor help?

no i had to replace my whole transmission and i replaced the backup light sensor and transmission sensor when i put the new one in.

__________________
Mud holes are like a pretty woman with an std, you want to hit but are scared of the consequences!

4wd is like a condom. i'd rather have it and not need it rather tan needing it and not having it!