|
09-03-2010, 09:17 PM
|
Lookin for 200,000
|
|
Join Date: Aug 2010
Posts: 12
|
|
Can't find Camshaft Position Synchronizer
CPS is chirping and probably needs to be replaced but I can't find it on my 99 Ranger 4.0 6 cyl. What needs to come off to locate? I'm sure it's been covered here before but I'm not having any luck with a good picture or description.
Last edited by Fritz 51; 09-03-2010 at 09:21 PM.
|
Register and never see these ads again. |
|
09-03-2010, 09:31 PM
|
|
On my 3rd Ranger
|
|
Join Date: Apr 2010
Posts: 1,398
|
|
Re: Can't find Camshaft Position Synchronizer
Quote:
Originally Posted by Fritz 51
CPS is chirping and probably needs to be replaced but I can't find it on my 99 Ranger 4.0 6 cyl. What needs to come off to locate? I'm sure it's been covered here before but I'm not having any luck with a good picture or description.
|
Are you sure that you don't mean 3.0 V6? I've never heard of a 4.0 having one fail.
__________________
1987 2.3/TK5, 125K.
|
09-04-2010, 05:57 AM
|
Lookin for 200,000
|
|
Join Date: Aug 2010
Posts: 12
|
|
Re: Can't find Camshaft Position Synchronizer
Definitely a 4.0. Maybe the noise isn't the CPS. I will have mechanic check it out.
|
09-04-2010, 06:20 AM
|
|
...............
|
|
Join Date: May 2009
Posts: 23,399
|
|
Re: Can't find Camshaft Position Synchronizer
it is located on the engine block below the intake
__________________
2005 Edge
|
09-09-2010, 08:33 AM
|
Lookin for 200,000
|
|
Join Date: Aug 2010
Posts: 12
|
|
Re: Can't find Camshaft Position Synchronizer
Mechanic diagnosed as broken flex plate not cam position sync. Nothing a $1,000 and a week in the shop won't fix.
|
|
|
|
09-09-2010, 10:53 AM
|
|
Welcome to FRF, & enjoy!
|
|
Join Date: Oct 2009
Posts: 5,130
|
|
Re: Can't find Camshaft Position Synchronizer
just FYI you have to remove the upper intake to even remotely begin to see it. even then its hidden very well by the lower intake it CAN BE removed with the lower intake still on just a complete pain in the butt. IDK about trucks with out a body lift because mine does have one which did help some but not much.
Quote:
Originally Posted by EMB1230
Are you sure that you don't mean 3.0 V6? I've never heard of a 4.0 having one fail.
|
Mine failed bad usually on the 4.0L OHV it causes a Misfire at high RPM like on the freeway mine the motor felt dead if you full throttled it.
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods
|
|
|
|
09-17-2010, 07:32 AM
|
Lookin for 200,000
|
|
Join Date: Aug 2010
Posts: 12
|
|
Re: Can't find Camshaft Position Synchronizer
Mechanic told me it was the flex plate but after they got into it they decided the problem was the cam position synchronizer after all. That jives with the info I got from this forum.
|
09-26-2010, 03:06 PM
|
|
Learning to use the forums
|
|
Join Date: Sep 2010
Posts: 1
|
|
Re: Can't find Camshaft Position Synchronizer
I Believe I have the same cam sync problem on a 2002 Ranger/Edge and need to replace it. Also having trouble locating the Cam Sync. Is it the same location as on the 99?.
__________________
Ford Ranger Edge 2002 V.6 3.OL
|
09-26-2010, 06:38 PM
|
|
Welcome to FRF, & enjoy!
|
|
Join Date: Oct 2009
Posts: 5,130
|
|
Re: Can't find Camshaft Position Synchronizer
yes on the 3.0L
__________________
2000 Ford Ranger XLT 4x4 Offroad, 4.0L ext cab, Converted to Manual M5OD-R1HD.
_____________
33x13.50 Toyo M/T, 15x10, Body Lift, Rebuilt OHV, JBA headers, Hurst shifter, Warn VR10000-s, Class 1 bars, Belltech Shackles, Mustang GT rear disc, Level II hooks, Modded rear hitch, Custom front hitch, Level II Blue seats and black console, Explorer IRS rear cover, Extang fulltilt, Leer Cap Yakima Roof Rack, Cobra 29 with firestik stake mount, Scangauge II
Few mods
|
|
|