No Crank after new engine initial startup
So I put a new long block in the truck, along with a laundry list of other new parts I'll post in my build thread. Anyway... put the new engine in, along with all new belt driven accessories. I did not replace the wiring harness. Fired up the new motor and it ran for 10ish mins at idle. I put my foot on the brake to put the truck in gear and take it for a lap around the block. As soon as I touched the brake the engine died and now I'm no crank/no start. Checked all fuses and about 90% certain I didnt miss any grounds when I hooked the wiring harness back to everything. Lost as to what could be wrong. Any ideas?
__________________
2006 XLT 4x4 4.0 V6 Build Thread - Superlift 4" Suspension Lift - Superlift front driveshaft - K&N FIPK Intake - aFe Silver Bullet throttle body spacer - 33" ProComp Xtreme MTs on 16" XD Hoss - Westin bull bar/ steps - GoRhino bed bars - Bushwacker Flares - 4x 130w KCs - TRex grille - Black headlights & corners - Black LED tails - Herculiner - Custom ex cab storage box - Mustang dome
FUTURE MODS: Window Tint (ASAP) - Custom center console - Explorer OHC - Red dash LEDs - 3" body lift & 35s
|